Ùrachadh mu Dheireadh 22/05/2017
Google pluspinterestShare on Stumble UponShare on RedditFacebookShare on Tumblr
TIOTAL
Iain Friseal, Gobha Inbhir Nis (25 de 39)
EXTERNAL ID
GB1796_SINCLAIR_SILVERSMITH_25
ÀITE
Inbhir Nis
SIORRACHD/PARRAIST
INBHIR NIS: Inbhir Nis 's Am Bànath
LINN
1970an
CRUTHADAIR
John Fraser
NEACH-FIOSRACHAIDH
Taigh-tasgaidh is Gaileiridh Ealan Inbhir Nis
AITHNEACHADH MAOINE
2250
KEYWORDS
seudraidh
seudan
neach-ceàirde
luchd-ciùird
obair meatailt
gobhaichean-airgid
claistinneach

Get Adobe Flash player

Dh'ionnsaich Iain Friseal, Gobha Airgid Inbhir Nis, a chiùird anns na 1930an aig Medlock and Craik, seudairean agus luchd-dèanamh uaireadairean aig 6 Sràid na Drochaid, Inbhir Nis. An dèidh làimhe, bha togalaichean aig a' chompanaidh ann an Exchange Place agus Geata na Bànrigh.

Anns an earrann chlaistinn seo bho na 1970an, tha Mgr. Friseal a' cuimhneachadh air air an àm a thòisicheadh air dèanamh cumaidhean 'centrifugal' anns an gnìomhachas na seudraidh. Tha an dealbh seo, a chaidh a thoirt le Taigh-tasgaidh agus Gaileiridh Ealain Inbhir Nis (IMAG), a' sealltainn fear de na h-earrannan aig Iain Friseal - sgian-pàipeir òir.

'The only disadvantage to it, really, was that your files had to become more sophisticated; you had to have much more expensive equipment to dress them up. You had very deep fire stain, in the beginning. They've gradually managed to overcome that but I know that at the beginning the fire stain was very deep so you had to file like blazes to get down into the actual metal, you know, and it was quite deep, reddish pink. You could see it, you know? And you had to use heavier and sometimes longer periods of time polishing, to get this fire skin off. But you got a lovely firm casting, much denser than sand casting. Better detail. And you could come down in weight which was the interesting thing, you could scale it down. So that, in actual fact, it came in at a very good time; it came in at a time when there was actually a slow increase in the price of metal, but it was pointing ahead to further increases, and it's up it was gonna go, it wasn't back or it wasn't going to stay steady. A lot of people knew this, so the new method, in fact, was a godsend to a lot of small people, and big people too'

Airson stiùireadh mu bhith a’ cleachdadh ìomhaighean agus susbaint eile, faicibh duilleag ‘Na Cumhaichean air Fad.’
’S e companaidh cuibhrichte fo bharantas clàraichte ann an Alba Àir. SC407011 agus carthannas clàraichte Albannach Àir. SC042593 a th’ ann an High Life na Gàidhealtachd.
Powered by Capture

Iain Friseal, Gobha Inbhir Nis (25 de 39)

INBHIR NIS: Inbhir Nis 's Am Bànath

1970an

seudraidh; seudan; neach-ceàirde; luchd-ciùird; obair meatailt; gobhaichean-airgid;; claistinneach

Taigh-tasgaidh is Gaileiridh Ealan Inbhir Nis

Bill Sinclair Audio: John Fraser, Silversmith

Dh'ionnsaich Iain Friseal, Gobha Airgid Inbhir Nis, a chiùird anns na 1930an aig Medlock and Craik, seudairean agus luchd-dèanamh uaireadairean aig 6 Sràid na Drochaid, Inbhir Nis. An dèidh làimhe, bha togalaichean aig a' chompanaidh ann an Exchange Place agus Geata na Bànrigh.<br /> <br /> Anns an earrann chlaistinn seo bho na 1970an, tha Mgr. Friseal a' cuimhneachadh air air an àm a thòisicheadh air dèanamh cumaidhean 'centrifugal' anns an gnìomhachas na seudraidh. Tha an dealbh seo, a chaidh a thoirt le Taigh-tasgaidh agus Gaileiridh Ealain Inbhir Nis (IMAG), a' sealltainn fear de na h-earrannan aig Iain Friseal - sgian-pàipeir òir.<br /> <br /> 'The only disadvantage to it, really, was that your files had to become more sophisticated; you had to have much more expensive equipment to dress them up. You had very deep fire stain, in the beginning. They've gradually managed to overcome that but I know that at the beginning the fire stain was very deep so you had to file like blazes to get down into the actual metal, you know, and it was quite deep, reddish pink. You could see it, you know? And you had to use heavier and sometimes longer periods of time polishing, to get this fire skin off. But you got a lovely firm casting, much denser than sand casting. Better detail. And you could come down in weight which was the interesting thing, you could scale it down. So that, in actual fact, it came in at a very good time; it came in at a time when there was actually a slow increase in the price of metal, but it was pointing ahead to further increases, and it's up it was gonna go, it wasn't back or it wasn't going to stay steady. A lot of people knew this, so the new method, in fact, was a godsend to a lot of small people, and big people too'